BCD-2525B Dual Battery Charger

BCD-2425B Dual Battery Charger – 24V 25A Heavy-Duty Dual Channel Charger for Professional Use

The BCD-2425B is a high-performance, Australian-made dual battery charger engineered to deliver stable 24V output for diagnostic and maintenance operations. With two independent channels and a 25-amp charge rate, this unit maintains full battery voltage under load—essential for accurate diagnostics, testing, and battery recovery in professional workshops and fleet operations.

Whether you’re working in automotive, transport, marine, or industrial settings, the BCD-2425B provides fast, automatic, and safe battery charging while ensuring compliance with Australian electrical standards.

Key Features

Dual Channel Output – Charge two batteries simultaneously with consistent performance
25A Charging Current – Handles large battery banks up to 300Ah
Diagnostic Stable Voltage – Maintains full battery voltage during load testing and scan tool operation
Three-Stage Charging – Optimised charging with LED indicators for real-time monitoring
Float and Boost Modes – Ensures battery readiness without overcharging
Durable Steel Housing – Powder-coated case designed for workshop environments
Safety First Design – Over-voltage, over-current, spike and surge protection
Heavy Duty Leads – Includes 2.0m of 10mm² cable with quality clamps
No Exposed Connections – Fully enclosed for operator safety
EMC Compliant – Built to Australian electrical safety standards

Benefits

Accurate Diagnostics Every Time
Unlike conventional chargers, the BCD-2425B maintains voltage under load, allowing scan tools and diagnostic equipment to deliver accurate readings without dropouts.

Built for Heavy-Duty Operations
With its dual-output design and 25A capacity, this unit is ideal for fleet workshops, industrial sites, and mobile battery service vans.

Fully Automatic Charging
Once connected, the charger automatically adjusts between charging, float, and standby modes—no manual intervention required.

Designed for Australian Conditions
Durable casing, integrated cable winders, and surge protection make it perfect for rugged workshop use.

Suitable as a Power Supply
Can also be used to power 24V devices where a consistent, regulated output is needed.

Technical Specifications

• Input Voltage: 207–253V

• Frequency: 50/60Hz

• Output Voltage (Charge): 28.8 – 29.6 VDC

• Float Voltage: 27.6 VDC

• Charge Current: 25A

• Number of Channels: 2

• Supported Battery Types: GEL, AGM, Flooded, Calcium

• Battery Capacity Range: 60Ah – 300Ah

• Efficiency: >85%

• Line/Load Regulation:
  • 0.1% across input voltage range

  • 1.5% across full output load

• Primary Cable: 2.0m long, 10mm² heavy-duty

Physical and Dimensional Properties

• Unit Weight: 9.0 kg

• Dimensions:
  • Width: 310 mm

  • Length: 290 mm

  • Height: 190 mm

• Carton Dimensions: 370 mm × 310 mm × 240 mm

• Build: Powder-coated steel casing with rubber feet and carry handle

Ideal Applications

• Automotive workshops and service centres

• Dual battery system maintenance

• Diagnostic tool support

• Transport and logistics fleets

• Marine and off-road vehicle maintenance

• Industrial battery charging stations

How to Use the BCD-2425B Charger

1. Position Safely – Place on a stable surface with ample airflow around vents.

2. Connect Batteries – Attach clamps securely to battery terminals. Use both channels if charging two batteries.

3. Plug into Mains Power – The unit will power up and begin automatic charging.

4. Monitor Status – LED indicators show charging stage (bulk, absorption, or float).

5. Unplug When Complete – Once charging is complete, the charger automatically enters float mode.
   

Always use in a dry, ventilated area and ensure connections are correct before powering on.

FAQs about BCD-2425B Dual Battery Charger

1. Can this charge two batteries at once?
   Yes, the BCD-2425B has two independent output channels, allowing you to charge two batteries simultaneously without performance loss.
2. Is this charger suitable for use with diagnostic equipment?
   Absolutely. It is specifically designed to maintain full battery voltage under load, ensuring scan tools and test devices work without interruption.
3. Can I use it on deep cycle or lithium batteries?
   This model is best suited for GEL, AGM, flooded, and calcium batteries. For lithium, check compatibility or consider chargers specifically rated for LiFePO4.
4. Does it require supervision while charging?
   No. The charger is fully automatic and includes safety features to protect the batteries and equipment.
5. What makes it different from standard chargers?
   Unlike standard models, this charger is built for professional environments, with high current delivery, diagnostic voltage stability, and dual-channel output.

Order the BCD-2425B Dual Battery Charger from Power Start

Upgrade your battery charging system with a professional-grade, Australian-built solution. The BCD-2425B Dual Battery Charger offers strength, safety, and diagnostic reliability for workshops and serious users. Order now from Power Start and keep your batteries at full power—anytime, anywhere.

Note: Free shipping does not apply to very heavy items that require skids or pallets.

Other Products:

Battery Capacity Tester, Smart Wash, Growatt 6000ES, 200Ah LiFePO4, Dual Battery Kits, Tachometer For Diesel Engine, Heavy Duty Jump Starter, Power Start Jump Pack, Industrial Battery, Automatic Trickle Battery Charger, 24 Volt Jump Pack, 120 Ah AGM, Anderson 350 Amp Connector, Automotive Multimeter, Battery Analyzer With Printer, AGM Starting Battery, 105Ah AGM Battery, Heavy Duty Battery Charger, Battery Charger Workshop