DC-DC Wiring Kit – 7 Metre LS-DBS-7 M
The DC-DC Wiring Kit – 7 Metre LS-DBS-7 M is an all-in-one heavy-duty wiring solution designed for dual battery setups in vehicles using DC-DC chargers. Whether you’re outfitting a 4WD, caravan, RV, camper trailer, or utility vehicle, this kit provides the reliable power transfer and protection needed for efficient off-grid energy systems. With premium-grade 6AWG twin-core wiring, Anderson plugs, and fuses included, it’s ready to support safe and durable DC-DC charging with minimal installation time.
This 7-metre kit is ideal for installations that require a long cable run between batteries, chargers, or isolators, making it a practical and professional-grade choice for automotive and recreational applications.
Key Features
- 7-metre 6AWG twin-core cable for extended reach and low voltage drop
- Pre-installed 50-amp Anderson plugs for secure, easy connections
- Supplied with 2 x 60-amp fuses for circuit protection
- Heavy-duty fuse holder included
- Additional Anderson plug for extra connection point
- Suitable for DC-DC chargers in dual battery configurations
- Built to withstand automotive and off-road conditions
Benefits of Having the DC-DC Wiring Kit – 7 Metre LS-DBS-7 M
- Simplifies dual battery setup wiring with all components included
- Provides safe, efficient current delivery over longer distances
- Reduces voltage loss with thick 6AWG cable
- Ensures secure, vibration-resistant connections with Anderson plugs
- Saves installation time—no need to source components separately
- Supports reliable power transfer in off-grid systems
- Minimises risk of short circuits with fuse protection
- Withstands harsh environments in 4WD, caravans, and mobile setups
How to Use the DC-DC Wiring Kit – 7 Metre LS-DBS-7 M
- Plan your wiring route from your main starter battery (or DC-DC charger) to your auxiliary battery.
- Measure and confirm the 7-metre length is sufficient for your setup, ensuring you avoid tight bends and sharp edges.
- Mount the heavy-duty fuse holder near the positive terminal of your main battery or DC-DC charger input.
- Insert one of the 60-amp fuses into the holder to protect the main supply side.
- Connect the pre-installed 50-amp Anderson plug to your DC-DC charger or power input terminal.
- Route the twin-core 6AWG cable toward your auxiliary battery, securing it with cable ties or conduit as needed.
- On the auxiliary side, install the second 60-amp fuse close to the positive terminal of the second battery.
- Use the second Anderson plug to connect to the DC-DC charger output or auxiliary battery input.
- Check all connections for tightness and ensure polarity is correct before powering the system.
- Once installed, power up the charger to begin safe and regulated dual battery charging.
FAQs about the DC-DC Wiring Kit – 7 Metre LS-DBS-7 M
What is included in the DC-DC Wiring Kit?
The kit includes a 7-metre length of high-quality 6AWG twin-core cable, two pre-installed 50-amp Anderson plugs, two 60-amp fuses, a heavy-duty fuse holder, and an extra 50-amp Anderson plug for optional use.
Can this kit handle high current loads?
Yes. The 6AWG cable and included 60-amp fuses are suitable for most DC-DC chargers rated up to 50 amps, supporting high current flow with minimal voltage drop over longer runs.
Is it suitable for caravans or camper trailers?
Absolutely. The 7-metre length makes it ideal for installations that require extended reach, such as between tow vehicles and caravans or in long-bodied vehicles.
Are tools required for installation?
Basic hand tools such as wire cutters, crimpers, and screwdrivers may be needed for securing the fuses and final connections. The Anderson plugs come pre-attached, which helps reduce installation time.
Does this kit support solar input?
While this kit is designed for DC-DC battery charging, it can be adapted to work with solar charge controllers or solar-ready DC-DC chargers that use Anderson connectors. Always check voltage and amperage compatibility.
Is it suitable for lithium batteries?
Yes. It supports multiple battery chemistries including AGM, Flooded, Gel, and LiFePO4—depending on your DC-DC charger’s specifications.
Get the DC-DC Wiring Kit – 7 Metre LS-DBS-7 M Now at Power Start
Set up your dual battery system with confidence using the DC-DC Wiring Kit – 7 Metre LS-DBS-7 M. Built for reliability and convenience, this all-in-one wiring kit ensures efficient power transfer for any vehicle-based energy setup. Get the DC-DC Wiring Kit – 7 Metre LS-DBS-7 M now at Power Start and keep your batteries charged, protected, and adventure-ready.
Other Products:
Load Tester, Smart Wash, Growatt 6000ES, 200Ah LiFePO4, Dual Battery Kits, Tachometer For Diesel Engine, Heavy Duty Jump Starter. Power Start Jump Pack, Industrial Battery, Automatic Trickle Battery Charger, 12V 24V Jump Starter, 120 Ah AGM, Anderson 350 Amp Connector, Automotive Multimeter. Battery Analyzer With Printer, AGM Starting Battery, 105Ah AGM Battery, Heavy Duty Battery Charger, and Battery Charger Workshop
