BC-325-36T Durst Battery Charger

BC-325-36T Durst Battery Charger

The BC-325-36T Durst Battery Charger is a heavy-duty, Australian-made charging solution for professional workshops, automotive businesses, marine operations, and industrial sites. With selectable voltage support for 12V, 24V, and 36V systems, it delivers robust and reliable performance with a maximum output of 30 amps and jump start assist up to 350 amps. This charger is built into a rugged steel trolley with pneumatic wheels, making it easy to manoeuvre in busy workshop environments.

Whether you’re charging deep-cycle batteries or jump-starting vehicles with completely flat batteries, the BC-325-36T offers the durability, flexibility, and safety features professionals demand. It’s fully fuse protected, fitted with intuitive controls, and built to handle the rigours of daily use in harsh conditions.

Key Features

• Workshop-grade battery charger for 12V, 24V, and 36V batteries
• Maximum charge current: 30 amps (intermittent), 25 amps (continuous)
• Jump start capacity: 350 amps at all voltages
• Peak amperage: 5600 amps
• Rugged powder-coated steel trolley for mobility
• Pneumatic pump-up wheels for smooth transport
• Self-resetting circuit breaker on DC side
• Large analogue amp meter for monitoring current
• Voltage selector switch (3 positions)
• Current control switch (4 positions)
• Fully insulated, colour-coded battery clamps
• Designed and made in Australia
• No exposed connections for added safety

Benefits of Having the BC-325-36T Durst Battery Charger

• Supports multiple voltage systems (12V, 24V, and 36V) with one machine
• Jump-starts vehicles quickly, including those with dead-flat batteries
• Heavy-duty wheels and frame allow easy movement around the workshop
• Fully fuse protected and compliant with Australian standards
• Provides consistent and stable current, protecting battery health
• Reduces downtime during battery failures with powerful jump-start output
• Clear amp meter makes it easy to monitor charging activity
• Minimal setup required—plug in, connect clamps, and select your settings
• Ideal for vehicle fleets, workshops, marine services, and equipment maintenance

How to Use the BC-325-36T Durst Battery Charger

Step 1: Position the Charger
Wheel the BC-325-36T to a flat, safe surface near the vehicle or battery system you need to charge or jump start.

Step 2: Set the Voltage
Use the voltage selector switch to choose 12V, 24V, or 36V depending on the battery system you’re working with.

Step 3: Connect the Cables
Attach the red clamp to the positive (+) battery terminal and the black clamp to the negative (−) terminal. Ensure a secure and correct connection.

Step 4: Select the Charge Current
Choose the desired current using the 4-position current control switch. Higher amperage speeds up charging but generates more heat—adjust accordingly.

Step 5: Monitor Charging
Observe the large analogue amp meter to track current flow and ensure the charger is operating correctly.

Step 6: Jump Start (if needed)
To perform a jump start, switch to the jump start mode and wait for the unit to reach full charge assistance. Once ready, start the vehicle as normal.

Step 7: Finish and Disconnect
When charging is complete, turn off the charger and remove the clamps, starting with the black (negative) one.

Step 8: Store Safely
Wheel the charger back to storage, coil the cables, and ensure it’s unplugged and safely positioned.

FAQs about the BC-325-36T Durst Battery Charger

What type of vehicles can this charger support?
The BC-325-36T is suitable for cars, trucks, boats, forklifts, and industrial machinery with 12V, 24V, or 36V electrical systems. It’s commonly used in workshops, marine yards, and heavy equipment service areas.

Can I leave the charger connected overnight?
While the unit is fuse protected and designed for workshop-grade durability, it’s always best to monitor long-term charging and avoid continuous overcharging. For overnight charging, use appropriate current settings and check periodically.

Is it safe to use in busy industrial areas?
Yes. The charger is housed in a rugged powder-coated steel case and features insulated clamps, no exposed connections, and a circuit breaker system, making it safe for high-traffic environments.

Can it be used for maintenance charging?
It is better suited for fast charging and jump start applications. For maintenance or trickle charging, a low-amp automatic charger would be more suitable.

How heavy is it?
The charger weighs approximately 24 kg and includes a sturdy trolley with pneumatic wheels for easy manoeuvring.

What type of batteries can it charge?
It is compatible with standard lead-acid, AGM, and other automotive/marine battery types used in 12V–36V systems.

Get the BC-325-36T Durst Battery Charger Now at Power Start

Ensure reliable performance and powerful charging for your fleet, shop, or equipment with the BC-325-36T Durst Battery Charger. Built in Australia to handle tough conditions, it’s the perfect workshop companion for heavy-duty battery management. Get the BC-325-36T Durst Battery Charger now at Power Start and keep your operations moving with dependable charging power.

Other Products:

Automotive Battery Tester, Smart Wash, Growatt 6000ES, 200Ah LiFePO4, Dual Battery Kits, Tachometer For Diesel Engine, Heavy Duty Jump Starter, Power Start Jump Pack, Industrial Battery, Automatic Trickle Battery Charger, 24 Volt Jump Pack, 120 Ah AGM, 350 Amp Anderson Plug, Auto Multimeter, Battery Tester With Printer, Deep Cycle Starting Battery, 105Ah AGM Battery, Heavy Duty Battery Charger, Battery Charger Workshop