MM-2608 Clamp meter

Key Features of MM-2608 Current Clamp

The MM-2608 Current Clamp is a high-performance AC/DC milliamp clamp meter designed for accurate current and voltage testing in automotive and electrical applications. With a wide range of measurement capabilities and a non-intrusive inductive clamp, the MM-2608 is a versatile tool ideal for diagnosing systems in vehicles, industrial machinery, and electronic circuits.

• Wide Current Range: 4A to 2000A (AC/DC) 
• Voltage Range: 400mV – 1000V DC, 400mV – 750V AC 
• Digital Display: Clear readings with a 42-segment bar graph 
• Jaw Opening: 57mm for conductors or 70mm × 18mm for bus bars 
• Input Impedance: 10 MΩ—ideal for sensitive automotive electronics 
• Auto Ranging: For AC/DC voltage, resistance, frequency, and capacitance 
• Diode Testing and Audible Continuity Function 
• Capacitance Range: 0µF – 40µF 
• Frequency Measurement: 100Hz – 400Hz 
• Data Hold Function: Freeze readings for convenience 
• Auto Power-Off: Saves battery during periods of inactivity 
• Overload Protection: Guards against measurement damage 
• Compact Dimensions: 70 × 39 × 147 mm 
• Weight: 350g for easy portability 

Benefits of Having MM-2608 Current Clamp

• Provides precise current measurement without disconnecting wires 
• Non-invasive clamp design ideal for live systems and confined spaces 
• Covers wide measurement ranges—current, voltage, resistance, capacitance, frequency 
• Lightweight and compact—perfect for mobile service technicians 
• Displays results clearly with a digital screen and bar graph for visual feedback 
• Protects electronics and the meter itself with overload safety features 
• Auto shut-off extends battery life during workshop or field use 
• Easy to operate with intuitive button layout and auto-ranging detection 
• Holds last reading with one touch—useful in tight spaces or low-light conditions 
• Suits both low-amperage diagnostics and high-current circuit testing 

How to Use MM-2608 Current Clamp

The MM-2608 Current Clamp is simple to operate for professionals and workshop users. Follow these basic steps:

1. Power On the Meter
   Turn on the device using the main selector dial. Choose between AC/DC current, voltage, resistance, capacitance, or frequency modes. 
2. Open the Clamp
   Use the lever to open the clamp jaws and place them around a single conductor. For accurate results, only one wire should be inside the clamp loop. 
3. Take Your Measurement
   Once in place, the digital display will show the real-time measurement. The 42-segment bar graph provides a visual representation of fluctuations or trends. 
4. Use Additional Features
   Activate the data hold button to freeze the current reading or check continuity using the audible tone feature. Diode testing and capacitance checks can also be accessed via mode selection. 
5. Shut Down or Let It Power Off
   When finished, switch the meter off or let the auto power-off feature conserve energy if left idle. 
6. Store Properly
   Place the clamp meter in a safe, dry location or carry case when not in use. 

FAQs about MM-2608 Current Clamp

What is the current measurement range of the MM-2608?

The MM-2608 Current Clamp can measure:

• DC Current: 0A to 2000A (accuracy ±1.5%) 
• AC Current: 0A to 1500A (accuracy ±1.5%)
  This makes it suitable for both small electrical systems and heavy-duty automotive or industrial applications. 

Can the MM-2608 measure voltage and resistance?

Yes. The MM-2608 Current Clamp includes:

• AC Voltage: 400mV – 750V 
• DC Voltage: 400mV – 1000V 
• Resistance: 400Ω – 40MΩ
  It also offers capacitance and frequency measurements for comprehensive diagnostics. 

What size conductor can the clamp fit?

The clamp jaws open wide enough to accommodate:

• 57mm round conductors 
• 70mm × 18mm bus bars
  This is ideal for most automotive cables and workshop equipment. 

Is this clamp suitable for automotive work?

Yes. The MM-2608 is designed specifically with automotive diagnostics in mind. Its high input impedance (10 MΩ) makes it safe for modern vehicle electronics, and it can measure everything from starter current to alternator output and battery voltage.

Does it come with protection features?

Yes. The unit includes:

• Overload protection 
• Auto power shut-off 
• High accuracy across voltage and current ranges
  These ensure safe operation even under demanding conditions or accidental misuse. 

Get the MM-2608 Current Clamp Now at Power Start

Add a reliable, versatile tool to your workshop with the MM-2608 Current Clamp—perfect for automotive technicians, electricians, and maintenance professionals. Power Start offers this compact, high-performance clamp meter built for safe, accurate measurement in demanding environments.

Other Products:

Automotive Battery Tester, Smart Wash, Growatt 6000ES, 200Ah LiFePO4, Dual Battery Kits, Tachometer For Diesel Engine, Heavy Duty Jump Starter, Power Start Jump Pack, Industrial Battery, Automatic Trickle Battery Charger, 24 Volt Jump Pack, 120 Ah AGM, 350 Amp Anderson Plug, Auto Multimeter, Battery Tester With Printer, Deep Cycle Starting Battery, 105Ah AGM Battery, Heavy Duty Battery Charger, Battery Charger Workshop